Project Description

Joystick transmitter

HyPro-6

Originally designed for hydraulic applications, the HyPro has become a popular transmitter in other application areas as well.

  • Exceptional, compact and ergonomic design
  • Integrated display
  • Optional: additional dust and impact protection through protectors and bellows -joysticks
  • SMJ Technology
Enquire now!
Data sheet
Frequency range 419 MHz / 429 MHz / 434 MHz / 868 MHz / 915 MHz
(depending on customer requirements and country-specific regulations)
RF power ≤ 1 mW, ≤ 10 mW, ≤ 25 mW
(depending on frequency range and country-specific regulations)
Typical working range ≤ 100 m
(depending on environmental conditions)
Frequency channel search, automatic LBT-Modus (listen before talk)
(depending on country and function configuration)
Antenna Integrated
Typical response time of control commands Approx. 50 ms
Modulation method FSK / GFSK
Data rate (depending on customer requirements) 9600 Baud (Bit/sek.)
SMJ-Technology Joysticks can be replaced by the operator in case of service.
Ø Current consumption (depending on the expansion level) Approx. 100 mA
Prewarning time “Battery empty” Approx. 30 Minuten
Data response (only with LC display) Operating range, transmission signal strength, status of the machine function or customer specified information.
Acoustic response Integrated buzzer, customized setting
LC/TFT display 2.2 inch monochrome display with customized design (64 x 128 px)
Energy saving function (stand by) Standard: after 60 min.
Optional: setting according to customer requirements (continuous operation possible)
Ambient operating temperature NiMH/AA: -20 °C to +70 °C
Li-Ion: -20 °C to +60 °C
Weight 1400 g
Case material Impact resistant glass fiber reinforced polyamide
CE certification Yes
IP-Protection class IP65
Data security Addressing of each transmitter by unique bit combination
EMERGENCY STOP or STOP function (sending stop telegrams for 2 sec.) Yes
NBB battery system
Power supply Option 1: NiMH battery (7,2 VDC / 2400 mAh), pluggable
Option 2: Li-Ion Akku (7,2 VDC / 3.500 mAh), pluggable
Operating time At Option 1: up to 24 hours
At Option 2: up to 35 hours
Loading form Externally, via a separate charger
Charger
Available for (UE) 230 VAC, 110 VAC, 12/24 VDC
Optional plug shape EU, USA, JP, GB, AU

Data feedback

– Reach
– Transmitting signal strength
– Status of the machine function
– Customer-specific feedback information and logos on request

LBT frequency search

When switching on or switching to another frequency, the system checks whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference. LBT is the abbreviation for ‘Listen before Talk’.

Design as cable desk

1. RF radio transmitter (optionally also with wired connection)
2. Cable console

For radio-critical work areas, the control unit can be supplied on request, not as a transmitter but as a cable console with the same functional equipment.

Practical carrying system


Abdominal stretcher belt
(order no..: 3.320.1010)

Protectors


Side protectors
(order no.: 3.300.1647)

Description

With its ergonomic shape and compact design, the HyPro-6 combines style and functionality. It was once designed specifically for hydraulic applications but over time the transmitter has become extremely popular beyond hydraulic applications.

For optimum display of your data feedback, the HyPro-6 features a monochrome display. Various feedback signals such as machine status, range or signal strength can be displayed on it at any time.

Thanks to the extraordinary design of the HyPro-6, there is room for 6 single-axis joysticks, with up to 4-stage detent on request. In addition, the integrated push buttons can be assigned various functions that are indispensable for your application.

For use in particularly harsh environments, the HyPro-6 can be protected with side-mounted protectors. These optimally absorb shocks and protect the radio remote control from penetrating dust and sand. Additional protection is provided by bellows joysticks that do not allow dirt to enter the HyPro-6.

Regardless of the type of joystick you choose for the HyPro-6, our patented SMJ technology allows you to replace a defective joystick yourself at any time with just a few simple steps. All you have to do is unscrew the old joystick and screw on the new one – and your system is completely ready for use again. When replacing the joystick, the housing remains closed so that no dust or dirt can get inside the transmitter. The joystick change is therefore possible at any time and in any place, no matter how dusty!

Technologies

SMJ

The SMJ joysticks are integrated in the housing with positive locking without housing openings. As joysticks are included as wear parts under certain conditions, NBB offers the option with its SMJ technology to be able to change a joystick on site. The housing does not have to be opened for this purpose so that no safety measures to prevent contamination must be taken. [More info]

Proximity Detection

Proximity Detection

The Radio Distance Guard detects within a radius of 6 metres when the operator approaches the machine. Depending on the zone he is in or the distance to the machine, the machine control is changed or stopped immediately in case of danger to the operator. [More info]

Teach-in

The teach-in function enables an optimized utilization of the joystick movement. By setting the min/max values on the transmitter side, the maximum move of the joystick is optimally utilized. As a result there are no longer any dead joystick motions. Even a minimum deflection of the joystick causes the immediate opening of a valve. [More info]

multi_user_system_technologie-nbb_funkfernsteuerungen

Multi-user system

The multi-user system enables radio communication between several transmitters and several receivers. Each transmitter can be optionally operated with several receivers at a workplace and / or vice versa. Provided that this connection is not otherwise used at this moment. [More info]

NBB battery system

NBB battery system

Nickel metal hydride batteries (NiMH) have a high energy density. The contacts have a self-cleaning design. The NBB battery pack is charged with a high charge current with a NBB charger. This quick charge is thermally controlled to optimize recharging and prevent overcharging. [More info]

LBT frequency search

LBT frequency search

When switching on or when switching the frequency, a check is carried out to determine whether the used frequency channel is reserved by another transmitter. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without disturbance. LBT is shortcut for Listen before Talk. [More info]

Data feedback

Data reporting

Visual representation of Operating Range, Transmission signal strength, Status of the machine function and Customer-specific information as well as logos supplemented by acoustic feedback (buzzer can be activated). [More info]

Neigungssensor

Inclination sensor

The built-in tilt sensor can detect when the transmitter exceeds a preset tilt value. This feature can help identify when an operator has fallen and can place a machine in a safe state. This inclination feature can also be programmed to initiate other actions such as an alarm. [More Info]

Applications

Abbrucharme

Demolition arms

Betonpumpe

Concrete pump

Containerhubwerk

Container hoists

Hafenkrane

Harbor cranes

Hebebühnen

Lifts

Hubarbeitsbühnen

Aerial work platforms

Ladekrane

Cranes

Schiffskrane

Ship cranes

SPMT

SPMT