The Nano-S is the smallest joystick transmitter in the Nano series. Due to its extremely compact design and the low weight of 690g, it is particularly suitable for less complex applications, especially in crane control.
- compact design
- robust housing
- low weight
- optional: LBT frequency search
|Frequency band (F-Band)||434,050 – 434,750 Mhz|
|Frequency band EU (G-Band)||866 – 870 MHz|
|Frequency band USA||915 MHz|
|HF power||< oder = 10 mW|
|Reach||≤ 300 m|
|Typical response time of control commands||15 ms|
|Warning time “battery low”||15 minutes|
|Temperature range||-20 °C to +65 °C|
|IP degree of protection||IP65|
|NBB battery system|
|Battery quick change system||NiMH / 1500 mAh|
|Operating time||60 hours/battery charge|
|Charging time approx.||1 hour|
|Charging form||external via charger|
|Dimensions||126 x 47 x 18 mm|
|Suitable for||230 V/AC, 110 V/AC, 12/24 V/DC|
|Connector form||optional EU, USA, JP, GB, AU|
|Temperature measurement for optimal recharging|
LBT frequency search
When switching on or switching to another frequency, the system checks whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference. LBT is the abbreviation for ‘Listen before Talk’.
2 x AA Mignon
Ni-MH / 1 900 mAH / 1.2 V
Battery: 1.5 V
Operating time: approx. 40 hours
Practical carrying system
Practical carrying system with stomach and neck strap
The smallest radio remote control of the Nano series impresses with its handy yet robust housing. Despite the compact design, a wide variety of control elements can be installed in the Nano-S. It offers space for up to two joysticks, but push buttons, key switches and stop switches are also possible.
Two systems are available for supplying power to the Nano-S: two AA battery cells or the Nbb’s own 7.2V battery. This has a particularly short charging time of 1 hour. However, this guarantees an operating time of the remote control of 60 hours – so your system is ready for use at any time!
Optionally, the Nano-S can be expanded with LBT technology. LBT stands for Listen before Talk. When the transmitter is switched on or when the frequency is changed, the system checks whether the selected frequency channel is already occupied by other transmitters. If this is the case, the next channel is checked until it is ensured that the channel is free and the transmitter can operate without interference.