Push button transmitter
Single handed remote control in pocket size, very flat transmitter with 16 one-stage push buttons and dot matrix display.
|Frequency band (F-Band)||433.05 – 434.79 MHz|
|Frequency band EU (G-Band)||863 – 870 MHz|
|Frequency band USA/CA||902 – 928 MHz|
|Frequency band China||418.95 – 419.20 MHz|
|Frequency band Japan||429.25 – 429.7375 MHz|
|HF power||< or = 10 mW|
|Operating range||≤ 300 m|
|Typical response time of control command||15 ms|
|Warning time “battery low”||15 minutes|
|Temperature range||-20 °C to +70 °C|
|Status display||Monochrome display (number of pixels: 64 x 128)|
|IP degree of protection||IP65|
|2 x AA Migon|
|Rechargeable battery||Ni-MH / 1 900 mAh / 1,2 V|
|Operating time||40 hours|
– Transmitting signal strength
– Status of the machine function
– Customer-specific feedback information and logos on request
LBT frequency search
When switching on or switching to another frequency, the system checks whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference. LBT is the abbreviation for ‘Listen before Talk’.
3,6 V NBB battery system with charger
Ni-MH / 750 mAh
Operating time: approx. 40 hours with one battery charge
Charging cradle for toggle switch transmitter with wall mounting
Practical charging cradle for fast charging. Can be mounted in buildings and vehicles.
(only in combination with AA battery, not possible with 3.6 V battery pack)
Practical carrying belt for small hand-held transmitters.
Practical carrying bag as protection against coarse dirt.