Project Description

Push button transmitter

Planar-B+

Despite its extremely handy and flat design, the Planar-B+ offers enough space for integrating your functions. The monochrome display can also show various data feedback.

  • Extremely flat and light
  • Integrated monochrome display
  • Integrated Li-Ion battery
  • Charging function via micro USB
CONSULTE AHORA!
hoja de datos
Frequency range 2,4 GHz
Frequency channel search, automatic LBT-Modus (Listen Before Talk)
(Depending on country and function configuration)
RF power ≤100 mW
(Depending on frequency range and country-specific regulations)
Typical response time of control commands approx. 50 ms
LF modulation method O-QPSK
Data rate 250k Baud (Bit/sec.) bei 2,4 GHz
Typical working range ≤ 100 m (Depending on environmental conditions)
Ø Current consumption (depending on expansion level, illumination, display, transmitting power) approx. 80 mA
Prewarning time “Battery empty” approx. 15 min.
Energy saving function (Standby) Standard: after 60 min.
Optional: setting according to customer requirements (continuous operation possible)
Data response (only with LCD display) Customer-specific feedback information / status of the machine function
Serial number mode (service case, device replacement) Entry via buttons combination on the device (optional)
LCD/TFT display 1.2 inch monochrome display (128 x 64 px)
Antenna Integrated
Ambient operating temperature -20 °C to +60 °C
Weight 280 g
Dimensions (length x width x height) 236 mm x 58 mm x 36 mm
Case material Impact resistant glass fiber reinforced polyamide
Status display (7-segment, depending on configuration) No
CE certification Yes
IP-Protection class IP67 / IK07
Data security Addressing of each transmitter by unique bit coding
Emergency Stop or Stop function (sending stop telegrams for 2 sec.) Yes
Power supply Li-Ion battery (3.6 VDC / 2.350 mAh), integrated
Operating time Up to 29 hrs.
Charging mode Standard: Micro-USB charging cable with USB power supply unit
Optional: Wall mount with charging function + charger

Data feedback

No

LBT frequency search

When switching on or changing the frequency, a check is made to see whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference.

Version

RF radio transmitter


Equipment bag
(Order no.: 3.360.1018)

Wall mount with charging function + charger incl. power supply (110-240 VAC) + 4 adapter

(Order no.: 2.250.1480)

Wall mount with charging function + charger incl. car plug (12-24 VDC)

(Order no.: 2.250.1481)


Wall mount with charging function + charger

(Order no.: 2.250.1479)

Wall mount (without charging function)

(Order no.: 2.250.1482)

Description

Thanks to its compact design and low weight, the Planar-B+ fits in any breast pocket or trouser pocket. Thanks to the integration of up to 16 single-stage or 6 two-stage buttons, many functions can nevertheless be covered and the transmitter can be used in a variety of ways. A monochrome display is also integrated in the Planar-B+ for visualising the machine feedback.

The integrated Li-Ion battery used for the power supply enables maximum operating comfort. Thanks to the charging contacts integrated in the transmitter, the battery can be charged quickly and easily in the appropriate charging cradle.

Optionally, the LBT technology (Listen Before Talk) can be integrated into the Planar-B+. This technology ensures that when the transmitter is switched on or the frequency is changed, a check is made to see whether the selected frequency channel is already occupied by other transmitters. If this is the case, the next channel is checked until it is certain that the channel is free and the transmitter can operate without interference.

Technologies

multi_user_system_technologie-nbb_funkfernsteuerungen

Multi-user system

The multi-user system enables radio communication between several transmitters and several receivers. Each transmitter can be optionally operated with several receivers at a workplace and / or vice versa. Provided that this connection is not otherwise used at this moment. [More info]

Búsqueda de frecuencia

LBT frequency search

When switching on or when switching the frequency, a check is carried out to determine whether the used frequency channel is reserved by another transmitter. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without disturbance. LBT is shortcut for Listen before Talk. [More info]

Recibo de datos

Data reporting

Visual representation of Operating Range, Transmission signal strength, Status of the machine function and Customer-specific information as well as logos supplemented by acoustic feedback (buzzer can be activated). [More info]

Applications

Aufsetzkipper

Skiploader

Brücken und Portalkrane

Bridge and gantry cranes

Chipper und Screener

Chipper / screening machines

Förderbänder

Conveyor belts

FTS

Automatic Guided Vehicles

Hallen und Laufkrane

Indoor / overhead cranes

Lichtmasten

Light poles

Mischer

Mixer

Nebelmaschine

Foggers

Regallagersysteme

Storage systems

Schleifmaschinen

Grinders

Schrottpressen

Scrap presses