Project Description


NBB Retrofitting radio

Retrofitting radio

Thanks to the Radio retrofitting, lever-operated systems such as loading cranes can be retrofitted with a radio remote control. With this variant, up to 6 levers can be moved.

Alternatively, we also offer a retrofit system that can move up to 4 levers.

NBB servo idraulica

Il controllo di posizione meccanico integrato offre:

  • Adatto per movimentazioni continue ed elevate temperature di esercixio.
  • Elevato standard di sicurezza.
  • EMC sicuro a causa di mancanza di funzioni elettroniche.
  • Fattibile ogni installazione.

Variazioni possibili

  • 4 o 6 funzioni
  • Connessione alla rete idraulica esistente
  • Alimentazione idraulica indipendente tramite la pompa idraulica elettrica  (12 V or 24 V)
acquista ora 6 funzioni!
acquista ora 4 funzioni!
Transmission frequency rangeSee type label
SafetyMulti bit address code with over 1 million combinations
Data repetition rateApprox. 15 ms
NF-ModulationFSK signal according to CCITT V.23
Baud rate9.600 Baud (Bit/sek.)
Operating rangeUp to 100 m (depends on surrounding)
Power supply7,2 V – NBB rechargeable battery pack
Power consumption60 – 100mA
RF power< 10 mW ERP
IP-Protection ClassIP 65
Operating temperature range-20 to + 70 °C
Weight (without battery)1.35 Kg
Dimensions (L x W x H)280 x 160 x 141 mm
ReceiverCompact-V R20
Receiver frequency rangeSee type lable
Data securityAdressing of each receiver through their own unique bit combination > 16 mio. possibilities
SecurityEMERGENCY STOP with self-test, restart lockout in the event of a defective emergency stop relay
Contact load emergency stop relayMax. 4A/250 V AC
CableMax. 6A, short-circuit protected
Power consumption<4 VA / 12 V DC; < 3 VA / 24 V DC, depending on the number of active relays
FeedThe exact version can be found in the technical appendix
IP-Protection ClassIP 65
Operating temperature range– 20 °C to + 70 °C
WeightApprox. 1,500 g
Dimensions (L x W x H)215 x 160 x 65 mm

Retrofitting radio-HyPro per gru da autocarro

  • Trasmittente HyPro
  • Ricevente Compact-V (antenna inclusa)
  • 2 batterie 7.2 V 2.400 mAh
  • Carica batterie
  • Cinghia a tracollo
  • Modulo elettroidraulico di adattamento compreso di supporti per il fissaggio
  • Riduttore di pressione + filtro per il collegamento al circuito idraulico.

Il kit retrofitting può essere format da 4 o 6 elemnti, in modo da soddisfare ogni esigenza.

Pratico sistema di trasporto

Pratico sistema di trasporto con cintura addominale e cinturino da collo


Protettori laterali per una sicurezza ancora maggiore.


This retrofit kit is designed to retrofit manual hydraulic systems with a low operating frequency with a radio remote control. It works proportionally and independently of the required actuation force. It is simply coupled with the existing manual operation of the machine.

With the servoblock retrofit system, NBB offers modern, safe, precise and completely safe use. To ensure your safety, Nbb expressly points out that the instructions in the manual must be understood before using the machine. Serious accidents can occur if the instructions are not followed. Radio controlled machines may only be operated by qualified and authorized persons. For safety reasons, the control should be kept in a closed cabin.

Invest in Radio retrofitting and benefit from the simple installation. Increase the ease of use and offer maximum safety for man and machine!


Funzione di autoapprendimento

The Teach-In adjustment feature allows for customized response for each joystick for optimum safety and performance. Several adjustments can be made to each individual motion such as min/max values and joystick deadband adjustment. [More Info]


Gru da autocarro