Project Description
Push button transmitter
Planar-C+
Thanks to its small and flat design, the Planar-C+ fits in any breast pocket. It is particularly suitable for controlling skip loaders, chippers, screening machines, conveyor belts, mobile transport systems, light poles, mixers, fog machines, high racks, suction/dishwashing vehicles, grinding machines and scrap presses.
- Extremely flat and light
- Integrated Li-Ion battery
- Charging function via micro USB
Frequency range | 2,4 GHz |
Frequency channel search, automatic | LBT-Modus (Listen Before Talk) (Depending on country and function configuration) |
RF power | ≤100 mW (Depending on frequency range and country-specific regulations) |
Typical response time of control commands | approx. 50 ms |
LF modulation method | O-QPSK |
Data rate | 250k Baud (Bit/sec.) bei 2,4 GHz |
Typical working range | ≤ 100 m (Depending on environmental conditions) |
Ø Current consumption (depending on expansion level, illumination, display, transmitting power) | approx. 80 mA |
Prewarning time “Battery empty” | approx. 15 min. |
Energy saving function (Standby) | Standard: after 60 min. Optional: setting according to customer requirements (continuous operation possible) |
Data response (only with LCD display) | No |
Serial number mode (service case, device replacement) | Entry via buttons combination on the device (optional) |
Antenna | Integrated |
Ambient operating temperature | -20 °C to +70 °C |
Weight | 250 g |
Dimensions (length x width x height) | 202 mm x 58 mm x 36 mm |
Case material | Impact resistant glass fiber reinforced polyamide |
Status display (7-segment, depending on configuration) | 1x(1-unit) |
CE certification | Yes |
IP-Protection class | IP67 / IK07 |
Data security | Addressing of each transmitter by unique bit coding |
Emergency Stop or Stop function (sending stop telegrams for 2 sec.) | Yes |
Power supply | Li-Ion battery (3.6 VDC / 2.350 mAh), integrated |
Operating time | Up to 29 hrs. |
Charging mode | Standard: Micro-USB charging cable with USB power supply unit Optional: Wall mount with charging function + charger |
Data feedback
No
LBT frequency search
When switching on or changing the frequency, a check is made to see whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference.
Version
RF radio transmitter
Equipment bag
(Order no.: 3.360.1018)
Wall mount with charging function + charger incl. power supply (110-240 VAC) + 4 adapter
(Order no.: 2.250.1480)
Wall mount with charging function + charger incl. car plug (12-24 VDC)
(Order no.: 2.250.1481)
Wall mount with charging function + charger
(Order no.: 2.250.1479)
Wall mount (without charging function)
(Order no.: 2.250.1482)
Description
The Planar-C+ impresses with its small and compact design. Nevertheless, it offers space for up to 15 single-stage or 6 two-stage buttons and can therefore be used in a variety of ways.
The integrated Li-Ion battery used for the power supply enables maximum operating comfort. Thanks to the charging contacts integrated in the transmitter, the battery can be charged quickly and easily in the appropriate charging cradle.
Optionally, the LBT technology (Listen Before Talk) can be integrated into the Planar-C+. This technology ensures that when the transmitter is switched on or when the frequency is changed, it checks whether the selected frequency channel is already occupied by other transmitters. If this is the case, the next channel is checked until it is certain that the channel is free and the transmitter can operate without interference.
Technologies

Multi-user system
The multi-user system enables radio communication between several transmitters and several receivers. Each transmitter can be optionally operated with several receivers at a workplace and / or vice versa. Provided that this connection is not otherwise used at this moment. [More info]

LBT frequency search
When switching on or when switching the frequency, a check is carried out to determine whether the used frequency channel is reserved by another transmitter. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without disturbance. LBT is shortcut for Listen before Talk. [More info]
Applications

Skiploader

Bridge and gantry cranes

Chipper / screening machines

Conveyor belts

Automatic Guided Vehicles

Indoor / overhead cranes

Light poles

Mixer

Foggers

Storage systems

Suction / Rinsing vehicles

Grinders
