Project Description
Receiver
Compact-M2 Forestry
This receiver is specially designed for forestry winches. Both cable winches with one and two drums are operated. The following functions are operated:
- Engine Start/Stop
- Pull/release winch
- Speed: Digital or analogue (0-5 VDC)
- Reserve A / B / C
- Emergency call / Reset emergency call
In addition, the Compact-M2 Forst has a CAN interface and an RS232 interface.
| Power supply | 8-35 VDC |
| Max. Switching current | 4 A |
| Outputs | Motor: Start/Stop Winch: pull/release Speed: digital or analog (0-5 VDC) 3 reserve outputs, emergency call system |
| Inputs | |
| Emergency stop relay | Optional |
| Antenna | Integrated or external |
| Weight | 800 g |
| Interface | RS232, 2x CAN-Bus |
| Emergency stop relay | Positively driven |
| Emergency call triggering time (passive emergency call) adjustable | |
| Speed | 0/1, stepless (adjustment motor can be connected directly) |
| Stepless E-speed | |
| Proportional gas adjustment | |
| Configuration of some functions with DIP switches | |
Technologies
Teach-in
The teach-in function enables an optimized utilization of the joystick movement. By setting the min/max values on the transmitter side, the maximum move of the joystick is optimally utilized. As a result there are no longer any dead joystick motions. Even a minimum deflection of the joystick causes the immediate opening of a valve.
Multi-user system
The multi-user system enables radio communication between several transmitters and several receivers. Each transmitter can be optionally operated with several receivers at a workplace and / or vice versa. Provided that this connection is not otherwise used at this moment.
Radiokey
The safety risk is significantly reduced using the RADIOKEY. Here a defined range is available for the crane or machine operator in which the remote control system can be activated. As a result, unwitting or inadvertent activation of the transmitter is excluded and the receiver is not sent any control information.
Data reporting
Visual representation of Operating Range, Transmission signal strength, Status of the machine function and Customer-specific information as well as logos supplemented by acoustic feedback (buzzer can be activated).