Project Description

NBB Radio retrofitting

Radio retrofitting

Thanks to the Radio retrofitting, lever-operated systems such as loading cranes can be retrofitted with a radio remote control. With this variant, up to 6 levers can be moved.

Alternatively, we also offer a retrofit system that can move up to 4 levers.

NBB servohydraulics

The integrated mechanical position control offers:

  • Suitable for high continuous loads at high working temperatures
  • High security standard
  • EMV safe due to missing electronic functions
  • Any installation positions

Possible variations

  • 4- or 6- functions
  • Connection to the existing hydraulic supply
  • Optional: Self-sufficient hydraulic supply by the electrical pump (12 V or 24 V)
BUY NOW 6 functions
Buy now 4 functions
TransmitterHyPro-6
Transmission frequency rangeSee type label
SafetyMulti bit address code with over 1 million combinations
Data repetition rateApprox. 15 ms
NF-ModulationFSK signal according to CCITT V.23
Baud rate9.600 Baud (Bit/sek.)
Operating rangeUp to 100 m (depends on surrounding)
Power supply7,2 V – NBB rechargeable battery pack
Power consumption60 – 100mA
RF power< 10 mW ERP
IP-Protection ClassIP 65
Operating temperature range-20 to + 70 °C
Weight (without battery)1.35 Kg
Dimensions (L x W x H)280 x 160 x 141 mm
ReceiverCompact-V R20
Receiver frequency rangeSee type lable
Data securityAdressing of each receiver through their own unique bit combination > 16 mio. possibilities
SecurityEMERGENCY STOP with self-test, restart lockout in the event of a defective emergency stop relay
Contact load emergency stop relayMax. 4A/250 V AC
CableMax. 6A, short-circuit protected
Power consumption<4 VA / 12 V DC; < 3 VA / 24 V DC, depending on the number of active relays
FeedThe exact version can be found in the technical appendix
IP-Protection ClassIP 65
Operating temperature range– 20 °C to + 70 °C
WeightApprox. 1,500 g
Dimensions (L x W x H)215 x 160 x 65 mm

Radio retrofitting for loading cranes with 4 or 6 functions

  • Radio remote control HyPro-6
  • Receiver Compact-V (antenna included)
  • 2 batteries 7.2 V 2.400 mAh
  • Charger with plug for cigarette lighter and car socket
  • Shoulder strap
  • Electro-hydraulic retrofitting module including fastening flags
  • Pressure reducing valve + filter for connecting the actuators to the crane’s oil circuit

The retrofitting kit consists of an add-on control module with 6/4 sections in order to serve the corresponding consumers.

Practical carrying system


Practical carrying system with waist- and neckbelt

Protectors


Side protectors for increased safety.

Description

This retrofit kit is designed to retrofit manual hydraulic systems with a low operating frequency with a radio remote control. It works proportionally and independently of the required actuation force. It is simply coupled with the existing manual operation of the machine.

With the servoblock retrofit system, NBB offers modern, safe, precise and completely safe use. To ensure your safety, Nbb expressly points out that the instructions in the manual must be understood before using the machine. Serious accidents can occur if the instructions are not followed. Radio controlled machines may only be operated by qualified and authorized persons. For safety reasons, the control should be kept in a closed cabin.

Invest in Radio retrofitting and benefit from the simple installation. Increase the ease of use and offer maximum safety for man and machine!

Technologies

Teach-In function

The Teach-In adjustment feature allows for customized response for each joystick for optimum safety and performance. Several adjustments can be made to each individual motion such as min/max values and joystick deadband adjustment. [More Info]

Applications

Loading cranes