Push button transmitter

Planar-B+

Despite its extremely handy and flat design, the Planar-B+ offers enough space for integrating your functions. The monochrome display can also show various data feedback.

Extremely flat and light
Integrated monochrome display
Integrated Li-Ion battery
Charging function via micro USB

CONSULTE AHORA!

hoja de datos

Technical information

Frequency range	2,4 GHz
Frequency channel search, automatic	LBT-Modus (Listen Before Talk) (Depending on country and function configuration)
RF power	≤100 mW (Depending on frequency range and country-specific regulations)
Typical response time of control commands	approx. 50 ms
LF modulation method	O-QPSK
Data rate	250k Baud (Bit/sec.) bei 2,4 GHz
Typical working range	≤ 100 m (Depending on environmental conditions)
Ø Current consumption (depending on expansion level, illumination, display, transmitting power)	approx. 80 mA
Prewarning time “Battery empty”	approx. 15 min.
Energy saving function (Standby)	Standard: after 60 min. Optional: setting according to customer requirements (continuous operation possible)
Data response (only with LCD display)	Customer-specific feedback information / status of the machine function
Serial number mode (service case, device replacement)	Entry via buttons combination on the device (optional)
LCD/TFT display	1.2 inch monochrome display (128 x 64 px)
Antenna	Integrated

Machine data

Ambient operating temperature	-20 °C to +60 °C
Weight	280 g
Dimensions (length x width x height)	236 mm x 58 mm x 36 mm
Case material	Impact resistant glass fiber reinforced polyamide
Status display (7-segment, depending on configuration)	No

Equipment safety

CE certification	Yes
IP-Protection class	IP67 / IK07
Data security	Addressing of each transmitter by unique bit coding
Emergency Stop or Stop function (sending stop telegrams for 2 sec.)	Yes

Power Supply

Power supply	Li-Ion battery (3.6 VDC / 2.350 mAh), integrated
Operating time	Up to 29 hrs.
Charging mode	Standard: Micro-USB charging cable with USB power supply unit Optional: Wall mount with charging function + charger

Data feedback

LBT frequency search

When switching on or changing the frequency, a check is made to see whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference.

Version

RF radio transmitter

Accessories

Equipment bag
(Order no.: 3.360.1018)

Wall mount with charging function + charger incl. power supply (110-240 VAC) + 4 adapter

(Order no.: 2.250.1480)

Wall mount with charging function + charger incl. car plug (12-24 VDC)

(Order no.: 2.250.1481)

Wall mount with charging function + charger

(Order no.: 2.250.1479)

Wall mount (without charging function)

(Order no.: 2.250.1482)

Description

Thanks to its compact design and low weight, the Planar-B+ fits in any breast pocket or trouser pocket. Thanks to the integration of up to 16 single-stage or 6 two-stage buttons, many functions can nevertheless be covered and the transmitter can be used in a variety of ways. A monochrome display is also integrated in the Planar-B+ for visualising the machine feedback.

The integrated Li-Ion battery used for the power supply enables maximum operating comfort. Thanks to the charging contacts integrated in the transmitter, the battery can be charged quickly and easily in the appropriate charging cradle.

Optionally, the LBT technology (Listen Before Talk) can be integrated into the Planar-B+. This technology ensures that when the transmitter is switched on or the frequency is changed, a check is made to see whether the selected frequency channel is already occupied by other transmitters. If this is the case, the next channel is checked until it is certain that the channel is free and the transmitter can operate without interference.

Technologies

multi_user_system_technologie-nbb_funkfernsteuerungen

Sistema multiusuario

El sistema multiusuario permite la comunicación por radio entre varios emisores y varios receptores. Cada emisor puede funcionar opcionalmente con varios receptores en un puesto de trabajo y/o viceversa. Siempre que esta conexión no se utilice de otro modo en este momento. [Más información]

Búsqueda de frecuencias

LBT es la abreviatura de «Listen before Talk» (escuchar antes de hablar). Cuando se enciende el transmisor o se cambia de frecuencia, se comprueba si el canal de frecuencia utilizado está ocupado por otros transmisores. Si es así, se comprueba automáticamente el siguiente canal de frecuencia hasta que se garantiza que el transmisor puede funcionar sin interferencias. [Más información]

Comunicación de datos

En todos nuestros transmisores se puede mostrar visualmente diversa información: Intensidad de la señal de transmisión, estado de la función de la máquina o información y logotipos específicos del cliente. También se pueden complementar con información acústica (se puede activar un zumbador). [Más información]