Project Description

Joystick transmitter

Nano-magna Ex

The Nano-magna Ex offers all the advantages of the Nano-magna and can be used without any problems in offshore areas in zones 1 and 2 with gas explosion hazards.

  • Maximum number of control elements possible
  • Also suitable for extremely complex applications
  • Low weight despite the size
  • Optional: 4.3 inch LC display with customised design
  • SMJ Technology
  • Operation with two rechargeable batteries possible, therefore up to 15 hours without interruption
Solicitar!
Hoja de datos
Frequency range 419 MHz / 429 MHz / 434 MHz / 868 MHz / 915 MHz / 2,4 GHz
(depending on customer requirements and country-specific regulations)
RF power ≤ 10 mW
Typical working range ≤ 100 m
(depending on environmental conditions)
Frequency channel search, automatic LBT-Modus (Listen Before Talk)
(depending on country and function configuration)
Antenna Integrated
Typical response time of control commands Approx. 50 ms
LF modulation method FSK / GFSK (SubGHz) / O-QPSK (2,4 GHz)
Data rate 9.600 Baud (Bit/sec) at SubGHz 250 k at 2.4 GHz
SMJ-Technology Joysticks can be replaced by the operator in case of service;
exception MSA3.
Ø Current consumption (depending on the expansion level) With LC display: approx. 250 mA
Prewarning time “Battery empty” Approx. 15 minutes
Acoustic response
LC/TFT display Optional: 4.3 inch graphic TFT color display (480 x 272 px), customized illustration possible
Energy saving function (Standby) Standard: after 60 min.
Optional: setting according to customer requirements (continuous operation possible)
Ambient operating temperature -20 °C to +50 °C
Weight 2.900 g
Dimensions (L x W x H) 354 mm x 229 mm x 170 mm
Case material Impact resistant, glass fiber reinforced polyamide
Status display (7-segment, depending on the configuration) 1x (2-digit)
CE certification Yes
IP-Protection class IP65
Data security Addressing of each transmitter by unique bit combination
EMERGENCY STOP or STOP function (sending stop telegrams for 2 sec.) Yes
Power supply NiMH battery (7.2 VDC / 1,800 mAh), pluggable
Operation time Up to 15 hours
Loading form Externally, via a separate charger
Automatic battery compartment switching Yes
Charger available for (UE) 110 VAC – 230 VAC, 12/24 VDC
Plug form AC (adapter Set) EU, USA, JP, GB, AU
Plug form DC Car charger plug

Data feedback

– Reach
– Transmitting signal strength
– Status of the machine function
– Customer-specific feedback information and logos on request

LBT frequency search

When switching on or switching to another frequency, the system checks whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference. LBT is the abbreviation for ‘Listen before Talk’.

Design as cable desk

For radio-critical work areas, the control unit can be supplied on request, not as a transmitter but as a cable console with the same functional equipment.

Practical carrying system

Standard:
– Abdominal belt (order no.: 3.320.1016)

– Back carrying strap (order no.: 3.320.1015)

Accesorios

The explosion-protected Nano-magna Ex joystick transmitter can be used in zones 1 and 2 with gas explosion hazards. This makes it the perfect transmitter in the offshore area.

The Nano-magna Ex is the largest representative of our explosion-protected safety radio remote controls. The particularly large housing offers space for the maximum number of operating elements such as up to 8 single-axis and 4 two-axis joysticks. In addition, toggle switches, rotary switches and buttons can also be integrated. Due to the multitude of possibilities and control elements, the Nano-magna is also suitable for extremely complex applications.

On request, the Nano-magna Ex can be equipped with a 4.3 inch LC display – including integration of the customer-specific design. The high-resolution display shows the information that is necessary for you and the safety of your employees. Turn the Nano-magna into your wireless remote control and place your logo on the back of the display!

Thanks to the patented SMJ technology, the joysticks can be replaced by operators themselves during service. The exchange is so easy that no staff training or special tools are required! The housing remains closed throughout, so that no protective measures against contamination need to be taken. Thanks to this patented technology, the complete system is completely ready for use again with just a few simple steps.

Tecnología

SMJ

Los joysticks montados en la superficie están integrados en las carcasas de nuestros transmisores sin aberturas en la carcasa. Dado que, en ciertas condiciones, los joysticks son piezas de desgaste, la tecnología SMJ de NBB le ofrece la posibilidad de cambiar un joystick in situ. No es necesario abrir la carcasa para este fin, por lo que no hay que tomar medidas de protección contra la suciedad. [Más info]

NBB IECEx ATEX

IECEx / ATEX

Si los transmisores se van a utilizar en entornos potencialmente explosivos, se deben tomar las precauciones técnicas adecuadas. Los transmisores Planar-B1 y -B2 EX han sido especialmente desarrollados y certificados para tales aplicaciones. [Más info]

Teach-In

La función «Teach-in» permite un uso óptimo del recorrido del joystick. Al ajustar los valores mín./máx. en el lado del transmisor, el recorrido disponible del joystick se utiliza de forma óptima. Esto significa que desaparecen los movimientos muertos en el joystick. Incluso una mínima desviación del joystick tiene un efecto inmediato. [Más info]

multi_user_system_technologie-nbb_funkfernsteuerungen

Sistema multiusuario

El sistema multiusuario permite la comunicación por radio entre varios transmisores y receptores. Cada transmisor puede funcionar opcionalmente con varios receptores en una estación de trabajo y/o viceversa, siempre que la conexión seleccionada no se utilice para otros fines en ese momento. [Más info]

Sistema de batería NBB

Sistema de batería NBB

Las baterías de níquel e hidruro metálico (NiMH) de NBB tienen una alta densidad de energía. Con un cargador NBB, las baterías se cargan con una alta corriente de carga. Esta carga rápida se controla térmicamente para optimizar la recarga y evitar la sobrecarga. [Más info]

Radiokey

Radiokey

La RADIOKEY proporciona al operador de la grúa o de la máquina un área definida en la que puede activar el radiocontrol remoto. Así se evita la activación inconsciente o accidental del transmisor y no se transmite ninguna información de control al receptor. Esto reduce significativamente el riesgo de seguridad. [Más info]

Búsqueda de frecuencia

Búsqueda de frecuencia

LBT es la abreviatura de «Listen before Talk». Cuando se enciende el transmisor o se cambia la frecuencia, se comprueba si el canal de frecuencia utilizado está ocupado por otros transmisores. Si este es el caso, se comprueba automáticamente el siguiente canal de frecuencia hasta asegurarse de que el transmisor pueda funcionar sin interferencias. [Más info]

Recibo de datos

Recibo de datos

En todos nuestros canales se puede mostrar visualmente diversa información: la intensidad de la señal de transmisión, el estado de las funciones de la máquina o la información y los logotipos específicos del cliente. También pueden complementarse con señales acústicas de recibo (puede activarse un zumbador). [Más info]

Aplicaciones

Offshore Krane

Grúas offshore

Ölplattform

Plataformas petroleras

Tanklaster

Camiones cisterna