Project Description
Push button transmitter
Planar-B+
Despite its extremely handy and flat design, the Planar-B+ offers enough space for integrating your functions. The monochrome display can also show various data feedback.
- Extremely flat and light
- Integrated monochrome display
- Integrated Li-Ion battery
- Charging function via micro USB
| Frequency range | 2,4 GHz |
| Frequency channel search, automatic | LBT-Modus (Listen Before Talk) (Depending on country and function configuration) |
| RF power | ≤100 mW (Depending on frequency range and country-specific regulations) |
| Typical response time of control commands | approx. 50 ms |
| LF modulation method | O-QPSK |
| Data rate | 250k Baud (Bit/sec.) bei 2,4 GHz |
| Typical working range | ≤ 100 m (Depending on environmental conditions) |
| Ø Current consumption (depending on expansion level, illumination, display, transmitting power) | approx. 80 mA |
| Prewarning time “Battery empty” | approx. 15 min. |
| Energy saving function (Standby) | Standard: after 60 min. Optional: setting according to customer requirements (continuous operation possible) |
| Data response (only with LCD display) | Customer-specific feedback information / status of the machine function |
| Serial number mode (service case, device replacement) | Entry via buttons combination on the device (optional) |
| LCD/TFT display | 1.2 inch monochrome display (128 x 64 px) |
| Antenna | Integrated |
| Ambient operating temperature | -20 °C to +60 °C |
| Weight | 280 g |
| Dimensions (length x width x height) | 236 mm x 58 mm x 36 mm |
| Case material | Impact resistant glass fiber reinforced polyamide |
| Status display (7-segment, depending on configuration) | No |
| CE certification | Yes |
| IP-Protection class | IP67 / IK07 |
| Data security | Addressing of each transmitter by unique bit coding |
| Emergency Stop or Stop function (sending stop telegrams for 2 sec.) | Yes |
| Power supply | Li-Ion battery (3.6 VDC / 2.350 mAh), integrated |
| Operating time | Up to 29 hrs. |
| Charging mode | Standard: Micro-USB charging cable with USB power supply unit Optional: Wall mount with charging function + charger |
Data feedback
No
LBT frequency search
When switching on or changing the frequency, a check is made to see whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference.
Version
RF radio transmitter
Equipment bag
(Order no.: 3.360.1018)
Wall mount with charging function + charger incl. power supply (110-240 VAC) + 4 adapter
(Order no.: 2.250.1480)
Wall mount with charging function + charger incl. car plug (12-24 VDC)
(Order no.: 2.250.1481)
Wall mount with charging function + charger
(Order no.: 2.250.1479)
Wall mount (without charging function)
(Order no.: 2.250.1482)
Description
Thanks to its compact design and low weight, the Planar-B+ fits in any breast pocket or trouser pocket. Thanks to the integration of up to 16 single-stage or 6 two-stage buttons, many functions can nevertheless be covered and the transmitter can be used in a variety of ways. A monochrome display is also integrated in the Planar-B+ for visualising the machine feedback.
The integrated Li-Ion battery used for the power supply enables maximum operating comfort. Thanks to the charging contacts integrated in the transmitter, the battery can be charged quickly and easily in the appropriate charging cradle.
Optionally, the LBT technology (Listen Before Talk) can be integrated into the Planar-B+. This technology ensures that when the transmitter is switched on or the frequency is changed, a check is made to see whether the selected frequency channel is already occupied by other transmitters. If this is the case, the next channel is checked until it is certain that the channel is free and the transmitter can operate without interference.
Technologies
Sistema multiusuario
El sistema multiusuario permite la comunicación por radio entre varios emisores y varios receptores. Cada emisor puede funcionar opcionalmente con varios receptores en un puesto de trabajo y/o viceversa. Siempre que esta conexión no se utilice de otro modo en este momento. [Más información]
Búsqueda de frecuencias
LBT es la abreviatura de «Listen before Talk» (escuchar antes de hablar). Cuando se enciende el transmisor o se cambia de frecuencia, se comprueba si el canal de frecuencia utilizado está ocupado por otros transmisores. Si es así, se comprueba automáticamente el siguiente canal de frecuencia hasta que se garantiza que el transmisor puede funcionar sin interferencias. [Más información]
Comunicación de datos
En todos nuestros transmisores se puede mostrar visualmente diversa información: Intensidad de la señal de transmisión, estado de la función de la máquina o información y logotipos específicos del cliente. También se pueden complementar con información acústica (se puede activar un zumbador). [Más información]
Applications
Skiploader
Bridge and gantry cranes
Chipper / screening machines
Conveyor belts
Automatic Guided Vehicles
Indoor / overhead cranes
Light poles
Mixer
Foggers
Storage systems
Grinders
