Joystick transmitter

HyPro+

The latest further development of the HyPro series extends the HyPro-8 with a 3.2 inch LC colour display. This allows the display of any data feedback in high resolution.

Exceptional, compact and ergonomic design
Integrated LC colour display
Optional: additional dust and impact protection through protectors and bellows joysticks
Optional: up to 6 toggle switches, 2 potentiometers and rotary switches

Enquire now!

Data Sheet

Technical information

Frequency range	419 MHz / 429 MHz / 434 MHz / 868 MHz / 915 MHz (depending on customer requirements and country-specific regulations)
RF power	≤ 1 mW, ≤ 10 mW, ≤ 25 mW (depending on frequency range and country-specific regulations)
Typical working range	≤ 100 m (depending on environmental conditions)
Frequency channel search, automatic	LBT-Modus (listen before talk) (depending on country and function configuration)
Antenna	Integrated
Typical response time of control commands	Approx. 50 ms
Modulation method	FSK / GFSK
Data rate (depending on customer requirements)	9600 Baud (Bit/sek.) at SubGHz 250k at 2,4 GHz
SMJ-Technology	Joysticks can be replaced by the operator in case of service.
Ø Current consumption (depending on the expansion level)	Approx. 100 mA
Prewarning time “Battery empty”	Approx. 15 Minuten
Data response (only with LC display)	Operating range, transmission signal strength, status of the machine function or customer specified information.
Acoustic response	Integrated buzzer, customized setting
LC/TFT display	3.2 inch TFT-display with customized design (800 x 480 px)
Energy saving function (stand by)	Standard: after 60 min. Optional: setting according to customer requirements (continuous operation possible)

Machine data

Ambient operating temperature	NiMH: -20 °C bis +70 °C Li-Ion: -20 °C bis +60 °C
Weight	1500 g
Dimensions (L x W x H)	280 mm x 160 mm x 141 mm
Case material	Impact resistant glass fiber reinforced polyamide

Equipment safety

CE certification	Yes
IP-Protection class	IP65 (enhanced IP-level upon request)
Data security	Addressing of each transmitter by unique bit combination
EMERGENCY STOP or STOP function (sending stop telegrams for 2 sec.)	Yes

Power Supply

NBB Battery system
Power supply	Option 1: NiMH battery (7.2 VDC / 2,400 mAh), pluggable Option 2: Li-Ion battery (7.2 VDC / 3,500 mAh), pluggable
Operating time	Option 1: up to 24 hours Option 2: up to 35 hours
Loading form	Standard: Externally, via a separate charger Optional: Via additionally built-in CAN bus connector with integrated battery charging functionality
Charger
Available for (UE)	110 VAC – 230 VAC, 12/24 VDC
Optional plug shape	EU, USA, JP, GB, AU

Data feedback

– Reach
– Transmitting signal strength
– Status of the machine function
– Customer-specific feedback information and logos on request

LBT frequency search

When switching on or switching to another frequency, the system checks whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference. LBT is the abbreviation for ‘Listen before Talk’.

Design as cable desk

1. RF radio transmitter (optionally also with wired connection)
2. Cable console

For radio-critical work areas, the control unit can be supplied on request, not as a transmitter but as a cable console with the same functional equipment.

Accessories

Practical carrying system

Abdominal stretcher belt
(NBB-No.: 3.320.1010)

Description

In order to adapt the HyPro, which is popular for hydraulic applications, for even more applications, a color LC display has been integrated. The extraordinary ergonomic design has been retained, as the compact transmitter has proven itself in use. The compact housing offers space for 8 single-axis joysticks with up to 4-step detent. In addition, 9 pushbuttons are integrated in the HyPro+ to cover as many functions as possible.

Even the most adverse conditions cannot harm the HyPro+: thanks to its specially developed housing, it has protection class IP65 (enhanced IP-level upon request) and is therefore particularly well protected against the penetration of dust, dirt and water. Laterally mounted protectors can absorb even strong shocks and provide additional protection for the radio remote control.

Thanks to our patented SMJ technology, you can easily replace a defective joystick yourself with just a few simple steps. The housing remains closed at all times so that no dust or dirt can get inside the transmitter. The joystick can therefore be changed at any time and in any place, no matter how dusty, and your system is fully operational again in just a few minutes!

Technologies

SMJ

The SMJ joysticks are integrated in the housing with positive locking without housing openings. As joysticks are included as wear parts under certain conditions, NBB offers the option with its SMJ technology to be able to change a joystick on site. The housing does not have to be opened for this purpose so that no safety measures to prevent contamination must be taken. [More information]

Proximity Detection

The Radio Distance Guard detects within a radius of 6 metres when the operator approaches the machine. Depending on the zone he is in or the distance to the machine, the machine control is changed or stopped immediately in case of danger to the operator. [More information]

Teach-in

The teach-in function enables an optimized utilization of the joystick movement. By setting the min/max values on the transmitter side, the maximum move of the joystick is optimally utilized. As a result there are no longer any dead joystick motions. Even a minimum deflection of the joystick causes the immediate opening of a valve. [More information]

Multi-user system

The multi-user system enables radio communication between several transmitters and several receivers. Each transmitter can be optionally operated with several receivers at a workplace and / or vice versa. Provided that this connection is not otherwise used at this moment. [More information]

NBB battery system

Nickel metal hydride batteries (NiMH) have a high energy density. The contacts have a self-cleaning design. The NBB battery pack is charged with a high charge current with a NBB charger. This quick charge is thermally controlled to optimize recharging and prevent overcharging. [More information]

Radiokey

The safety risk is significantly reduced using the RADIOKEY. Here a defined range is available for the crane or machine operator in which the remote control system can be activated. As a result, unwitting or inadvertent activation of the transmitter is excluded and the receiver is not sent any control information. [More information]

LBT frequency search

When switching on or when switching the frequency, a check is carried out to determine whether the used frequency channel is reserved by another transmitter. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without disturbance. LBT is shortcut for Listen before Talk. [More information]

Data reporting

Visual representation of Operating Range, Transmission signal strength, Status of the machine function and Customer-specific information as well as logos supplemented by acoustic feedback (buzzer can be activated). [More information]

Inclination sensor

The built-in tilt sensor can detect when the transmitter exceeds a preset tilt value. This feature can help identify when an operator has fallen and can place a machine in a safe state. This inclination feature can also be programmed to initiate other actions such as an alarm. [More Information]