Compact receiver with 8-35 VDC. The receiving unit has 6 PWM outputs, 2 CAN interfaces, 4 digital inputs, an RS232 interface and a forced guided emergency stop relay. The antenna is mounted externally as standard. The Compact-M R6 is optimised as a CAN bus receiver.
- Voltage: 8-35 VDC
- Small, compact and robust housing design
- Protection class IP65
- Individual solution adaptation according to specifications.
|Power supply||8-36 VDC|
|Max. Switching current||4 A|
|Outputs||Up to 6 PWM outputs|
|Inputs||4 x digital|
|Emergency stop relay||Forcibly managed|
|Safety level||Emergency stop output: PL d|
|Wiring||Cable with open end or plug|
|Dimensions||(L x W x H): 174 x 89 x 65 mm|
|Interface||RS232, RS485 or 2x CAN-Bus|
The teach-in function enables an optimized utilization of the joystick movement. By setting the min/max values on the transmitter side, the maximum move of the joystick is optimally utilized. As a result there are no longer any dead joystick motions. Even a minimum deflection of the joystick causes the immediate opening of a valve.
The multi-user system enables radio communication between several transmitters and several receivers. Each transmitter can be optionally operated with several receivers at a workplace and / or vice versa. Provided that this connection is not otherwise used at this moment.
The safety risk is significantly reduced using the RADIOKEY. Here a defined range is available for the crane or machine operator in which the remote control system can be activated. As a result, unwitting or inadvertent activation of the transmitter is excluded and the receiver is not sent any control information.
Visual representation of Operating Range, Transmission signal strength, Status of the machine function and Customer-specific information as well as logos supplemented by acoustic feedback (buzzer can be activated).