Compact receiver with optional 12 VDC or 24 VDC supply. There are 7 programmable relays available as well as a positively driven emergency stop relay. The antenna is available both internally and, on request, externally with an extension cable. An interface with RS232 is available.
- Voltage: 12 VDC or 24 VDC
- Small, compact and robust housing design
- Protection class IP65
- Individual solution adaptation according to specifications.
|Power supply||12 VDC or 24 VDC|
|Max. Switching current||4 A|
|Emergency stop relay||Forcibly managed|
|Antenna||Integrated or external|
|Dimensions||(L x W x H): 173 x 114 x 63 mm|
The teach-in function enables an optimized utilization of the joystick movement. By setting the min/max values on the transmitter side, the maximum move of the joystick is optimally utilized. As a result there are no longer any dead joystick motions. Even a minimum deflection of the joystick causes the immediate opening of a valve.
The multi-user system enables radio communication between several transmitters and several receivers. Each transmitter can be optionally operated with several receivers at a workplace and / or vice versa. Provided that this connection is not otherwise used at this moment.
The safety risk is significantly reduced using the RADIOKEY. Here a defined range is available for the crane or machine operator in which the remote control system can be activated. As a result, unwitting or inadvertent activation of the transmitter is excluded and the receiver is not sent any control information.
Visual representation of Operating Range, Transmission signal strength, Status of the machine function and Customer-specific information as well as logos supplemented by acoustic feedback (buzzer can be activated).