Project Description

Joystick transmitter

Nano-magna

The Nano-magna is our largest joystick transmitter, which is particularly suitable for complex applications.

  • Maximum number of control elements possible
  • Also suitable for extremely complex applications
  • Low weight despite the size
  • Optional: 4.3 inch LC display with customised design
  • SMJ Technology
  • Operation with two rechargeable batteries possible, therefore up to 60 hours without interruption
Enquire now!
Data sheet
Frequency range 419 MHz / 429 MHz / 434 MHz / 868 MHz / 915 MHz / (2,4 GHz)
(depending on customer requirements and country-specific regulations)
RF power ≤ 1 mW, ≤ 10 mW, ≤ 25 mW
(depending on frequency range and country-specific regulations)
Typical working range ≤ 100 m
(depending on environmental conditions)
Frequency channel search, automatic LBT-Modus (listen before talk)
(depending on country and function configuration)
Antenna Integrated
Typical response time of control commands Approx. 50 ms
Modulation method FSK / GFSK
Data rate (depending on customer requirements) 9600 Baud (Bit/sek.) at SubGHz
SMJ-Technology Joysticks can be replaced by the operator in case of service.
Exception MSA3.
Ø Current consumption (depending on the expansion level) With LED 7-segment display: approx. 140 mA
With LC display: approx. 250 mA
Prewarning time “Battery empty” Approx. 15 Minuten
Data response (only with LC display) Optional: 4.3 inch graphic TFT color display with customized design (480 x 272 px)
Acoustic response Integrated buzzer, customized setting
LC/TFT display Optional: 2.2 inch monochrome display with customized design (128 x 64 px)
Energy saving function (stand by) Standard: after 60 min.
Optional: setting according to customer requirements (continuous operation possible)
Ambient operating temperature NiMH: -20 °C to +70 °C
Li-Ion: -20 °C to +60 °C
Weight 2 800 g
Dimensions (L x W x H) 354 mm x 229 mm x 141 mm
Case material Impact resistant glass fiber reinforced polyamide
Status display (7-segment, depending on the configuration) 1x (2-digit)
CE certification Yes
IP-Protection class IP65
Data security Addressing of each transmitter by unique bit combination
EMERGENCY STOP or STOP function (sending stop telegrams for 2 sec.) Yes
Power supply
Option 1: NiMH battery (7.2 VDC / 2,400 mAh), pluggable
Option 2: Li-Ion battery (7.2 VDC / 3,500 mAh), pluggable
Operating time
Option 1: up to 10 hours
Option 2: up to 14 hours
Loading form Externally, via a separate charger
Optional: via additionally built-in CAN bus connector with integrated battery charging functionality
Automatic battery compartment switching Yes
Charger
Available for (UE) 110 VAC – 230 VAC, 12/24 VDC
Optional plug shape EU, USA, JP, GB, AU

Data feedback

– Reach
– Transmitting signal strength
– Status of the machine function
– Customer-specific feedback information and logos on request

LBT frequency search

When switching on or switching to another frequency, the system checks whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference. LBT is the abbreviation for ‘Listen before Talk’.

Design as cable desk

1. RF radio transmitter (optionally also with wired connection)
2. Cable console

For radio-critical work areas, the control unit can be supplied on request, not as a transmitter but as a cable console with the same functional equipment.

Practical carrying system

Standard:
– Abdominal belt (order no.: 3.320.1016)

Optional:
– Neck sling with padding (order no.: 3.320.1011)
– Back carrying strap (order no.: 3.320.1015)

Description

The Nano-magna is the largest representative of our joystick transmitters. The particularly large housing offers space for the maximum number of operating elements such as up to 8 single-axis and 4 two-axis joysticks. In addition, toggle switches, rotary switches and buttons can also be integrated. Due to the multitude of possibilities and control elements, the Nano-magna is also suitable for extremely complex applications.

On request, the Nano-magna can be equipped with a 4.3 inch LC display – including integration of the customer-specific design. The high-resolution display shows the information that is necessary for you and the safety of your employees. Turn the Nano-magna into your wireless remote control and place your logo on the back of the display!

Thanks to the patented SMJ technology, the joysticks can be replaced by operators themselves during service. The exchange is so easy that no staff training or special tools are required! The housing remains closed throughout, so that no protective measures against contamination need to be taken. Thanks to this patented technology, the complete system is completely ready for use again with just a few simple steps.

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

Technologies

SMJ

The SMJ joysticks are integrated in the housing with positive locking without housing openings. As joysticks are included as wear parts under certain conditions, NBB offers the option with its SMJ technology to be able to change a joystick on site. The housing does not have to be opened for this purpose so that no safety measures to prevent contamination must be taken. [More Information]

Proximity Detection

The Radio Distance Guard detects within a radius of 6 metres when the operator approaches the machine. Depending on the zone he is in or the distance to the machine, the machine control is changed or stopped immediately in case of danger to the operator. [More information]

Teach-in

The teach-in function enables an optimized utilization of the joystick movement. By setting the min/max values on the transmitter side, the maximum move of the joystick is optimally utilized. As a result there are no longer any dead joystick motions. Even a minimum deflection of the joystick causes the immediate opening of a valve. [More information]

multi_user_system_technologie-nbb_funkfernsteuerungen

Multi-user system

The multi-user system enables radio communication between several transmitters and several receivers. Each transmitter can be optionally operated with several receivers at a workplace and / or vice versa. Provided that this connection is not otherwise used at this moment. [More information]

NBB battery system

NBB battery system

Nickel metal hydride batteries (NiMH) have a high energy density. The contacts have a self-cleaning design. The NBB battery pack is charged with a high charge current with a NBB charger. This quick charge is thermally controlled to optimize recharging and prevent overcharging. [More information]

LBT frequency search

When switching on or when switching the frequency, a check is carried out to determine whether the used frequency channel is reserved by another transmitter. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without disturbance. LBT is shortcut for Listen before Talk. [More information]

Data reporting

Visual representation of Operating Range, Transmission signal strength, Status of the machine function and Customer-specific information as well as logos supplemented by acoustic feedback (buzzer can be activated). [More information]

Inclination sensor

The built-in tilt sensor can detect when the transmitter exceeds a preset tilt value. This feature can help identify when an operator has fallen and can place a machine in a safe state. This inclination feature can also be programmed to initiate other actions such as an alarm. [More Information]

Applications

Excavator

Stump grinder cutter

Concrete pump

Drilling

Chipper / screening machines

Container hoists

Dockside cranes

Cranes

Wheel loaders

Ship cranes

Scrap press

SPMT

Stone crushers / screening machines

Tunneling technology