Project Description

Push button transmitter

Planar-D

The smallest button transmitter in the NBB portfolio is particularly impressive with its extremely flat design in breast pocket format.

  • Extremely flat and light
  • Particularly short charging time thanks to the charging tray
  • 7-segment display for data feedback
  • Optional: Power supply via 3.6 V NBB battery
ENQUIRE NOW!
DATA SHEET
Frequency range419 MHz / 429 MHz / 434 MHz / 868 MHz / 915 MHz
(depending on customer requirements and country-specific regulations)
RF power≤ 1 mW, ≤ 10 mW, ≤ 25 mW
(depending on frequency range and country-specific regulations)
Typical working range≤ 100 m
(depending on environmental conditions)
Frequency channel search, automaticLBT-Modus (listen before talk)
(depending on country and function configuration)
AntennaIntegrated
Typical response time of control commandsApprox. 50 ms
LF modulation methodFSK / GFSK
Baud rate (depending on customer requirements)9600 Baud (Bit/sek.)
Ø Current consumption (depending on the expansion level)Approx. 60 mA
Prewarning time “Battery empty”Approx. 15 Minuten
Data response (only with LCD display)No
Serial number mode (service case, device replacement)Entry via buttons combination on the device (optional)
LCD/TFT display7-segment channel/status display
Energy saving function (stand by)Standard: after 60 min.
Optional: setting according to customer requirements (continuous operation possible)
Ambient operating temperature-20 °C to +70 °C
Weight160 g
Dimensions (L x W x H)124 mm x 56 mm x 37 mm
Case materialImpact resistant glass fiber reinforced polyamide
CE certificationYes
IP-Protection classIP65
Data securityAddressing of each transmitter by unique bit combination
EMERGENCY STOP or STOP function (sending stop telegrams for 2 sec.)Yes
Power supplyOption 1: NiMH battery (3,6 VDC / 750 mAh), pluggable
Option 2: 2x AA/LR6/Mignon battery or accu
Operating timeAt Option 1: up to 12 hours
At Option 2: up to 30 hours
Loading formExternally, via a separate charger
Optional: via wall mounted charging cradle / charger by using a 3.6 V battery
Available for (UE)230 VAC, 110 VAC, 12/24 VDC
Optional plug shapeEU, USA, JP, GB, AU

Data feedback

No

LBT frequency search

When switching on or switching to another frequency, the system checks whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference. LBT is the abbreviation for ‘Listen before Talk’.

Design as cable desk

RF radio transmitter

Carrying belt


Practical carrying belt (only usable with devices with AA batteries)
(NBB-No.: 3.320.1012)

Carrying bag


Practical carrying bag bag as protection against coarse dirt.
(NBB-No.: 3.360.1012)

Description

The Planar-D convinces with its small and compact design and can be used in a variety of applications. With up to 9 single-stage buttons and an extremely flat design in breast pocket format, this is the smallest transmitter in the NBB product portfolio. Exchangeable AA cells allow maximum flexibility. The Planar-D is inherently equipped with charging contacts that allow rechargeable batteries to be charged using a charging cradle.Optionally, the 3.6 V battery developed by NBB itself can also be used as an energy source. With only one charge, it can power the transmitter for up to 40 hours.
The feedback from your machine can be visualised on the integrated 7-segment display. The Planar-D can also be expanded with LBT technology. LBT stands for Listen before Talk and means that when the transmitter is switched on or when the frequency is changed, the system checks whether the selected frequency channel is already occupied by other transmitters. If this is the case, the next channel is checked until it is ensured that the channel is free and the transmitter can operate without interference.

Technologies

multi_user_system_technologie-nbb_funkfernsteuerungen

Multi-user system

The multi-user system enables radio communication between several transmitters and several receivers. Each transmitter can be optionally operated with several receivers at a workplace and / or vice versa. Provided that this connection is not otherwise used at this moment. [More information]

NBB battery system

NBB battery system

Nickel metal hydride batteries (NiMH) have a high energy density. The contacts have a self-cleaning design. The NBB battery pack is charged with a high charge current with a NBB charger. This quick charge is thermally controlled to optimize recharging and prevent overcharging. [More information]

LBT frequency search

When switching on or when switching the frequency, a check is carried out to determine whether the used frequency channel is reserved by another transmitter. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without disturbance. LBT is shortcut for Listen before Talk. [More information]

Data reporting

Visual representation of Operating Range, Transmission signal strength, Status of the machine function and Customer-specific information as well as logos supplemented by acoustic feedback (buzzer can be activated). [More information]

Applications

Aufsetzkipper

Skiploader

Bridge & gantry cranes

Indoor & overhead cranes

Foggers