Project Description



The Nano-minor stands out with its compact and robust design yet low weight.
The fact that, despite the small housing, many operating elements can still be integrated into the Nano-minor makes it the ideal transmitter for crane control.

  • 2 two-axis joysticks
  • 7-segment display
  • Robust and compact design
  • Operation with 7.2 V NiMH battery
  • SMJ technology
Transmitter frequency rangeSee name plate
Data securityAddressing of each transmitter by unique bit combination
Data refresh rateApprox. 15 ms
AF modulationFSK – Signal according to CCITT V.23
Baud rate9.600 Baud (bit/sec.)
ReachUp to 100 m (depending on environment)
Power supply7.2 V – NBB battery pack
Power consumption60 – 100 mA
HF power< 10 mW ERP
IP degree of protectionIP65
Temperature range-20 to + 70 °C
Weight (without battery)815 g
Dimensions (L x W x H)247 x 139 x 117 mm
ReceiverCompact-V R20
Receiving frequency rangeSee name plate
Data securityAddressing of each receiver by own unique bit combinations > 16 million possibilities
SecurityEMERGENCY STOP with self-test, restart lockout in case of defective EMERGENCY-STOP relay
Contact load emergency stop relaysMax. 4 A / 250 VAC
Supply lineMax. 6A, short circuit protected
Power consumption< 4 VA / 12 VDC; < 3 VA / 24 VDC, depending on the number of active relays
Feed-inPlease refer to the technical appendix for the exact design
IP degree of protectionIP65
Temperature range– 20 °C to + 70 °C
WeightApprox. 1.500 g
Dimensions (L x W x H)215 x 160 x 65 mm
  • Nano-minor transmitter (NBB No. 10036)
  • Receiver Compact-V R20 (NBB No. 10037)
  • 2 batteries 7.2 V 2400 mAh
  • Charger with power supply unit
  • Abdominal belt
  • 1 Antenna

Practical carrying system

Practical carrying system with stomach and neck strap


The Nano-minor is the best-selling model of Nano radio remote controls. It convinces by its compact and robust design as well as its low weight. Despite the compact design, numerous different operating elements can be installed. For example, up to 6 single-axis and 3 two-axis joysticks are possible. However, other operating elements such as toggle switches, rotary switches and buttons can also be integrated without difficulty.


Tower cranes