Project Description

FBK

The Nano-minor stands out with its compact and robust design yet low weight.
The fact that, despite the small housing, many operating elements can still be integrated into the Nano-minor makes it the ideal transmitter for crane control.

  • 2 two-axis joysticks
  • 7-segment display
  • Robust and compact design
  • Operation with 7.2 V NiMH battery
  • SMJ technology
BUY NOW!
Transmitter Nano-minor
Transmitter frequency range See name plate
Data security Addressing of each transmitter by unique bit combination
Data refresh rate Approx. 15 ms
AF modulation FSK – Signal according to CCITT V.23
Baud rate 9.600 Baud (bit/sec.)
Reach Up to 100 m (depending on environment)
Power supply 7.2 V – NBB battery pack
Power consumption 60 – 100 mA
HF power < 10 mW ERP
IP degree of protection IP65
Temperature range -20 to + 70 °C
Weight (without battery) 815 g
Dimensions (L x W x H) 247 x 139 x 117 mm
Receiver Compact-V R20
Receiving frequency range See name plate
Data security Addressing of each receiver by own unique bit combinations > 16 million possibilities
Security EMERGENCY STOP with self-test, restart lockout in case of defective EMERGENCY-STOP relay
Contact load emergency stop relays Max. 4 A/250 V AC
Supply line Max. 6A, short circuit protected
Power consumption <4 VA / 12 V DC; < 3 VA / 24 V DC, depending on the number of active relays
Feed-in Please refer to the technical appendix for the exact design
IP degree of protection IP 65
Temperature range – 20 °C to+ 70 °C
Weight Approx. 1.500 g
Dimensions (L x W x H) 215 x 160 x 65 mm
  • Nano-minor transmitter (NBB No. 10036)
  • Receiver Compact-V R20 (NBB No. 10037)
  • 2 batteries 7.2 V 1500 mAh
  • Charger with power supply unit
  • Abdominal belt
  • 1 Antenna

Practical carrying system


Practical carrying system with stomach and neck strap

Description

The Nano-minor is the best-selling model of Nano radio remote controls. It convinces by its compact and robust design as well as its low weight. Despite the compact design, numerous different operating elements can be installed. For example, up to 6 single-axis and 3 two-axis joysticks are possible. However, other operating elements such as toggle switches, rotary switches and buttons can also be integrated without difficulty.

Applications

Tower cranes