Project Description

Toggle switch transmitter

Planar-V4

The Planar-V4 has a compact design and was specially designed to be carried sideways by the operator. The compact, practical and reliable design thus allows maximum freedom of movement for the user.

  • Excellent wearing comfort
  • Particularly short charging time thanks to the charger cradle
  • 7-segment display for data feedback
  • Optional: Power supply via 3.6 V NBB battery
ENQUIRE NOW!
Frequency range419 MHz / 429 MHz / 434 MHz / 868 MHz / 915 MHz
(depending on customer requirements and country-specific regulations)
RF power≤ 1 mW, ≤ 10 mW, ≤ 25 mW
(depending on frequency range and country-specific regulations)
Typical working range≤ 100 m
(depending on environmental conditions)
Frequency channel search, automaticLBT-Modus (listen before talk)
(depending on country and function configuration)
AntennaIntegrated
Typical response time of control commandsApprox. 20 ms
LF modulation methodFSK / GFSK
Baud rate (depending on customer requirements)9600 Baud (Bit/sek.)
Ø Current consumption (depending on the expansion level)Approx. 60 mA
Prewarning time “Battery empty”Approx. 15 Minuten
Acoustic responseIntegrated buzzer, setting according to customer requirements
Display element7-segment channel/status display
Energy saving function (stand by)Standard: after 30 min.
Optional: setting according to customer requirements (continuous operation possible)
Ambient operating temperature-20 °C to +70 °C
Weight320 g
Case materialImpact resistant glass fiber reinforced polyamide
CE certificationYes
IP-Protection classIP65
Data securityAddressing of each transmitter by unique bit combination
EMERGENCY STOP or STOP function (sending stop telegrams for 2 sec.)Yes
Power supply2x AA/LR6/Mignon battery or accu
Operating timeUp to 30 hours
Loading formExternally, via a separate charger
Optional: via wall mounted charging cradle by using a battery
Available for (UE)230 VAC, 110 VAC, 12/24 VDC
Optional plug shapeEU, USA, JP, GB, AU

LBT frequency search

When switching on or switching to another frequency, the system checks whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference. LBT is the abbreviation for ‘Listen before Talk’.

Design as cable desk

RF radio transmitter
For radio-critical work areas, the control unit can be supplied on request, not as a transmitter but as a cable console with the same functional equipment.

Practical carrying system


Waist strap
(NBB-No.: 3.320.1000)

Description

The compact design and low weight allow the Planar-V8 to be carried sideways unnoticed. The interface enables the integration of up to 4 toggle switches, 2 potentiometers and a mushroom switch as an EMERGENCY STOP in accordance with EN ISO 13849-1.

The replaceable AA cells used for the power enable maximum performance. Thanks to the charging contacts integrated in the transmitter, they can be charged quickly and easily in the appropriate charging cradle.

On request, you can also use the 3.6 V battery developed by NBB for the Planar-V4. This allows the transmitter to operate for up to 40 hours on a single charge.

Optionally, the Planar-V4 can be equipped with LBT (Listen before Talk) technology. This technology ensures that when the transmitter is switched on or when the frequency is changed, a check is made to see whether the selected frequency channel is already occupied by other transmitters. If this is the case, the next channel is checked until it is ensured that the channel is free and the transmitter can operate without interference.

Technologies

Teach-in

The teach-in function enables an optimized utilization of the joystick movement. By setting the min/max values on the transmitter side, the maximum move of the joystick is optimally utilized. As a result there are no longer any dead joystick motions. Even a minimum deflection of the joystick causes the immediate opening of a valve. [More info]

Multi-user system

The multi-user system enables radio communication between several transmitters and several receivers. Each transmitter can be optionally operated with several receivers at a workplace and / or vice versa. Provided that this connection is not otherwise used at this moment. [More info]

NBB battery system

NBB battery system

Nickel metal hydride batteries (NiMH) have a high energy density. The contacts have a self-cleaning design. The NBB battery pack is charged with a high charge current with a NBB charger. This quick charge is thermally controlled to optimize recharging and prevent overcharging. [More info]

Radiokey

The safety risk is significantly reduced using the RADIOKEY. Here a defined range is available for the crane or machine operator in which the remote control system can be activated. As a result, unwitting or inadvertent activation of the transmitter is excluded and the receiver is not sent any control information. [More info]

LBT frequency search

When switching on or when switching the frequency, a check is carried out to determine whether the used frequency channel is reserved by another transmitter. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without disturbance. LBT is shortcut for Listen before Talk. [More info]

Data reporting

Visual representation of Operating Range, Transmission signal strength, Status of the machine function and Customer-specific information as well as logos supplemented by acoustic feedback (buzzer can be activated). [More info]

Applications

Mischer

Mixer

Nebelmaschine

Foggers

Saug- und Spülfahrzeuge

Suction and flushing vehicles

Winden und Seilzüge

Winches / winches / forestry winches