Push button transmitter
The PocketEvo-magna is the largest model in the PocketEvo series. However, the housing is designed so that even this large transmitter can be operated with one hand.
- Modular design
- Compact, robust special housing
- 7-segment display for data feedback
- SMP Technology
|Frequency range||419 MHz / 429 MHz / 434 MHz / 868 MHz / 915 MHz|
(depending on customer requirements and country-specific regulations)
|RF power||≤ 1 mW, ≤ 10 mW, ≤ 25 mW|
(depending on frequency range and country-specific regulations)
|Typical working range||≤ 100 m|
(depending on environmental conditions)
|Frequency channel search, automatic||LBT-Modus (listen before talk)|
(depending on country and function configuration)
|Typical response time of control commands||Approx. 50 ms|
|Modulation method||FSK / GFSK|
|Data rate (depending on customer requirements)||9600 Baud (Bit/sek.)|
250k at 2,4 GHz
|SMP-Technology||Push buttons can be replaced by the operator in case of service.|
|Ø Current consumption (depending on the expansion level)||With LED 7-segment display: approx. 70 mA|
With LC display: approx. 180 mA
|Prewarning time “Battery empty”||Approx. 10 Minuten|
|Data response (optional)||Customer specified information / status of the machine|
|LC/TFT display||Option 1: 7-segment display|
Option 2: 2.2 inch monochrome display with customized design (320 x 240 px)
|Energy saving function (stand by)||Standard: after 60 min.|
Optional: setting according to customer requirements (continuous operation possible)
|Ambient operating temperature||-20 °C to +70 °C|
|Dimensions (L x W x H)||321 mm x 93 mm x 60 mm|
|Case material||Impact resistant glass fiber reinforced polypropylene / TPE sheathing|
|Status display (7-segment, depending on the configuration)||1x (2-digit, only without LCD display)|
|Data security||Addressing of each transmitter by unique bit combination|
|EMERGENCY STOP or STOP function (sending stop telegrams for 2 sec.)||Yes|
|Power supply||Option 1: Li-Ion battery (3,6 VDC / 2350 mAh), pluggable|
Option 2: 2x AA/LR6/Mignon battery or accu
|Operating time||At Option 1: up to 12 hours|
At Option 2: up to 9 hours
|Loading form||Externally, via a separate charger|
|Available for (UE)||230 VAC, 110 VAC, 12/24 VDC|
|Optional plug shape||EU, USA, JP, GB, AU|
Customer-specific feedback information / status of the machine function
LBT frequency search
When switching on or switching to another frequency, the system checks whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference. LBT is the abbreviation for ‘Listen before Talk’.
Design as cable desk
1. RF radio transmitter (optionally also with wired connection)
2. Cable console
For radio-critical work areas, the control unit can be supplied on request, not as a transmitter but as a cable console with the same functional equipment.
Either one, two or three-stage
SMP technology: simple push buttons change without opening the housing, no protective measures against contamination necessary.
Max. two rotary switches and / or optionally also potentiometer etc.
An additional button each left and right, for free use
Neck strap for PocketEvo
Optional (NBB-No.: 3.320.1022)
Belly strap for PocketEvo
Optional (NBB-No.: 3.320.1021)
Hand strap for PocketEvo
The largest model in the new PocketEvo-Series has 10 buttons, which can be 1-, 2- or 3-step or stepless, depending on customer requirements. In addition, the integration of various additional operating elements such as up to two rotary switches and lateral buttons is possible without any problems. This makes the PocketEvo-magna suitable for even the most complex applications.
For visualization of the machine feedback, a 2.2 inch LC color display is available as an alternative to the 7-segment display. The design can be adapted according to your wishes.
Thanks to the patented SMP technology, all keys can be replaced by operators themselves in just a few minutes. Without special tools, each button can be unscrewed individually and a new one inserted. The robust special housing remains closed at all times, so that no protective measures against soiling have to be taken.
Downtimes of your system are additionally reduced to a minimum by the integrated CDC key. Because if the transmitter needs to be replaced, the new device can be connected to the receiver and put into operation in just a few minutes. The CDC key is removed from the old device and inserted into the new one.
For optimum protection against dirt and impact, a special housing was developed for the PocketEvo. The integrated, all-round protective rubber coating in conjunction with the glass fibre reinforced plastic core ensures that all electronic components can withstand extreme external mechanical influences. This means that the PocketEvo can be used in particularly harsh environments without any problems.
The jury of the Industry Prize was also convinced by the radio remote control, so that they awarded the PocketEvo the “Industry Prize 2017”. The prize is awarded to particularly progressive industrial products that have a high economic, technological and ecological benefit. The PocketEvo was awarded the “BEST OF” rating.
Compact, handy and easy to use, the PocketEvo button transmitter allows you to work in complete safety conditions without reducing the effectiveness of machine operation.
The Surface Mounted Push-Buttons (SMP) are form-fit integrated into the PocketEvo series housings. In the event of service, the operator can easily replace a broken button himself on site. The housing does not have to be opened for this purpose, so no protective measures against soiling need to be taken. [More info]
The teach-in function enables an optimized utilization of the joystick movement. By setting the min/max values on the transmitter side, the maximum move of the joystick is optimally utilized. As a result there are no longer any dead joystick motions. Even a minimum deflection of the joystick causes the immediate opening of a valve. [More info]
The multi-user system enables radio communication between several transmitters and several receivers. Each transmitter can be optionally operated with several receivers at a workplace and / or vice versa. Provided that this connection is not otherwise used at this moment. [More info]
NBB battery system
Nickel metal hydride batteries (NiMH) have a high energy density. The contacts have a self-cleaning design. The NBB battery pack is charged with a high charge current with a NBB charger. This quick charge is thermally controlled to optimize recharging and prevent overcharging. [More info]
The safety risk is significantly reduced using the RADIOKEY. Here a defined range is available for the crane or machine operator in which the remote control system can be activated. As a result, unwitting or inadvertent activation of the transmitter is excluded and the receiver is not sent any control information. [More info]
LBT frequency search
When switching on or when switching the frequency, a check is carried out to determine whether the used frequency channel is reserved by another transmitter. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without disturbance. LBT is shortcut for Listen before Talk. [More info]
Visual representation of Operating Range, Transmission signal strength, Status of the machine function and Customer-specific information as well as logos supplemented by acoustic feedback (buzzer can be activated). [More info]