Push button transmitter
The PocketEvo® magna is the largest model in the PocketEvo® series. However, the housing is designed so that even this large transmitter can be operated with one hand.
- modular design
- compact, robust special housing
- 7-segment display for data feedback
- SMP Technology
|Frequency band (F-Band)||433.05 – 434.79 MHz|
|Frequency band EU (G-Band)||863 – 870 MHz|
|Frequency band USA/CA||902 – 928 MHz|
|Frequency band China||418.95 – 419.20 MHz|
|Frequency band Japan||429.25 – 429.7375 MHz|
|HF power||< or = 10 mW|
|Operating range||≤ 300 m|
|Typical response time of control command||15 ms|
|SMJ-Technology||SMP technology (easy key exchange without opening the housing, no protective measures against contamination necessary)|
|Warning time “battery low”||15 minutes|
|Temperature range||-20 °C to +70 °C||-20 °C to +70 °C|
|Dimensions (L x W x H)||321 x 93 x 60 mm||321 x 93 x 60 mm|
|Weight||730 g||740 g|
|Status display||2 x 7-segment display (LED)||LCD colour display; number of pixels: 320 x 240|
|IP degree of protection||IP65|
|2 x AA Mignon|
|Rechargeable battery||Ni-MH / 1 900 mAh / 1,2 V|
|Operating time||35 hours|
|Temperature measurement for optimal recharging|
– Transmitting signal strength
– Status of the machine function
– Customer-specific feedback information and logos on request
LBT frequency search
When switching on or switching to another frequency, the system checks whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference. LBT is the abbreviation for ‘Listen before Talk’.
2 x AA Mignon
Ni-MH / 1 900 mAH / 1.2 V
Battery: 1.5 V
Operating time: approx. 40 hours
optionally one-, two- or three-stage
SMP technology: Easy key exchange without opening the housing, no protective measures against contamination necessary.
Max. two rotary switches and / or optionally also potentiometers etc.
left and right one additional button each, for free use
Neck strap for PocketEvo®
Shoulder strap for PocketEvo®
Belly strap for PocketEvo®
Hand strap for PocketEvo®
The largest model in the new PocketEvo® series has 10 buttons, which can be 1-, 2- or 3-step or stepless, depending on customer requirements. In addition, the integration of various additional operating elements such as up to two rotary switches and lateral buttons is possible without any problems. This makes the PocketEvo® magna suitable for even the most complex applications.
Thanks to the patented SMP technology, all keys can be replaced by operators themselves in just a few minutes. Without special tools, each button can be unscrewed individually and a new one inserted. The robust special housing remains closed at all times, so that no protective measures against soiling have to be taken.
Downtimes of your system are additionally reduced to a minimum by the integrated CDC key. Because if the transmitter needs to be replaced, the new device can be connected to the receiver and put into operation in just a few minutes. The CDC key is removed from the old device and inserted into the new one.
For optimum protection against dirt and impact, a special housing was developed for the PocketEvo®. The integrated, all-round protective rubber coating in conjunction with the glass fibre reinforced plastic core ensures that all electronic components can withstand extreme external mechanical influences. This means that the PocketEvo® can be used in particularly harsh environments without any problems.
The jury of the Industry Prize was also convinced by the radio remote control, so that they awarded the PocketEvo® the “Industry Prize 2017”. The prize is awarded to particularly progressive industrial products that have a high economic, technological and ecological benefit. The PocketEvo® was awarded the “BEST OF” rating.
Compact, handy and easy to use, the PocketEvo® button transmitter allows you to work in complete safety conditions without reducing the effectiveness of machine operation.