Project Description

Push button transmitter

PocketEvo-minor

With the PocketEvo-Series NBB has developed a new generation of radio remote control for crane & machine control. The smallest model is distinguished above all by its compact but extremely robust housing.

  • Modular design
  • Compact, robust special housing
  • 7-segment display for data feedback
  • Radiokey
  • SMP Technology
Enquire now!
Data sheet
Frequency range 419 MHz / 429 MHz / 434 MHz / 868 MHz / 915 MHz
(depending on customer requirements and country-specific regulations)
RF power ≤ 1 mW, ≤ 10 mW, ≤ 25 mW
(depending on frequency range and country-specific regulations)
Typical working range ≤ 100 m
(depending on environmental conditions)
Frequency channel search, automatic LBT-Modus (listen before talk)
(depending on country and function configuration)
Antenna Integrated
Typical response time of control commands Approx. 50 ms
Modulation method FSK / GFSK
Data rate (depending on customer requirements) 9600 Baud (Bit/sek.)
250 kbit/s at 2,4 GHz
SMP-Technology Push buttons can be replaced by the operator in case of service.
Ø Current consumption (depending on the expansion level) With LED 7-segment display: approx. 70 mA
With LC display: approx. 180 mA
Prewarning time “Battery empty” Approx. 15 Minuten
Data response (optional) Customer specified information / status of the machine
Vibration response Yes
LC/TFT display Option 1: 7-segment display
Option 2: 2.2 inch monochrome display with customized design (320 x 240 px)
Energy saving function (stand by) Standard: after 60 min.
Optional: setting according to customer requirements (continuous operation possible)
Ambient operating temperature AA: -20 °C to +70 °C
Li-Ion: -20 °C to +60 °C
Weight 630 g
Dimensions (L x W x H) 257 mm x 93 mm x 60 mm
Case material Impact resistant glass fiber reinforced polypropylene / TPE sheathing
Status display (7-segment, depending on the configuration) 1x (2-digit, only without LCD display)
CE certification Yes
IP-Protection class IP65
Data security Addressing of each transmitter by unique bit combination
EMERGENCY STOP or STOP function (sending stop telegrams for 2 sec.) Yes
Power supply Option 1: Li-Ion battery (3,6 VDC / 2 350 mAh), pluggable
Option 2: 2x AA/LR6/Mignon battery or accu
Operating time At Option 1: up to 12 hours
At Option 2: up to 9 hours
Loading form Externally, via a separate charger
Available for (UE) 230 VAC, 110 VAC, 12/24 VDC
Optional plug shape EU, USA, JP, GB, AU

Data feedback

Customer-specific feedback information / status of the machine function

LBT frequency search

When switching on or switching to another frequency, the system checks whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference. LBT is the abbreviation for ‘Listen before Talk’.

Design as cable desk

1. RF radio transmitter (optionally also with wired connection)
2. Cable console

For radio-critical work areas, the control unit can be supplied on request, not as a transmitter but as a cable console with the same functional equipment.

SMP pushbuttons

Either one, two or three-stage
SMP technology: simple push buttons change without opening the housing, no protective measures against contamination necessary.

Rotary switch

Max. two rotary switches and / or optionally also potentiometer etc.

Side buttons

An additional button each left and right, for free use

Practical carrying system

Standard:

– Hand strap for PocketEvo (order no.: 3.320.1020)

Optional:

– Neck strap for PocketEvo (order no.: 3.320.1022)

– Waist strap for PocketEvo (Order no.: 3.320.1021)

Description

The smallest model in the new PocketEvo range has 6 buttons, which can have 1, 2 or 3 levels as well as stepless, depending on customer requirements. In addition, the integration of various additional operating elements such as rotary switches and side buttons is possible without any problems. This makes the PocketEvo-minor suitable for more complex applications in addition to crane control.

The PocketEvo-minor LCD expands the smallest model in the series with a 2.2 inch display. A wide variety of feedback signals, including customised ones, can be displayed on it.

Thanks to the patented SMP technology, all installed keys can be easily replaced by operators themselves. Without special tools, each button can be unscrewed individually and a new one inserted. However, the robust special housing remains closed at all times, so that no protective measures against soiling have to be taken. This means that the system is fully operational again in just a few minutes and downtimes are reduced to a minimum!

We have developed our own special housing for optimum protection against dirt and impact. The integrated, all-round protective rubber coating in combination with the glass fibre reinforced plastic core ensures that all electronic components can withstand extreme external mechanical influences. This means that the PocketEvo can be used in particularly harsh environments without any problems.

Should a transmitter become damaged, you can connect the new device to the receiver and put it into operation in just a few minutes thanks to the integrated Radiokey. The key is removed from the device with the help of a screwdriver and inserted into the new one – your system is ready for operation again and expensive downtimes are avoided.

The jury of the Industry Prize was also convinced by the radio remote control, so that they awarded the PocketEvo the “Industry Prize 2017”. The prize is awarded to particularly progressive industrial products that have a high economic, technological and ecological benefit. The PocketEvo was awarded the “BEST OF” rating.

Compact, handy and easy to use, the PocketEvo button transmitter allows you to work in complete safety conditions without reducing the effectiveness of machine operation.

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

Technologies

SMP

SMP

The Surface Mounted Push-Buttons (SMP) are form-fit integrated into the PocketEvo series housings. In the event of service, the operator can easily replace a broken button himself on site. The housing does not have to be opened for this purpose, so no protective measures against soiling need to be taken. [More info]

NBB Teach In

Teach-in

The teach-in function enables an optimized utilization of the joystick movement. By setting the min/max values on the transmitter side, the maximum move of the joystick is optimally utilized. As a result there are no longer any dead joystick motions. Even a minimum deflection of the joystick causes the immediate opening of a valve. [More info]

multi_user_system_technologie-nbb_funkfernsteuerungen

Multi-user system

The multi-user system enables radio communication between several transmitters and several receivers. Each transmitter can be optionally operated with several receivers at a workplace and / or vice versa. Provided that this connection is not otherwise used at this moment. [More info]

NBB battery system

NBB battery system

Nickel metal hydride batteries (NiMH) have a high energy density. The contacts have a self-cleaning design. The NBB battery pack is charged with a high charge current with a NBB charger. This quick charge is thermally controlled to optimize recharging and prevent overcharging. [More info]

Radiokey

Radiokey

The safety risk is significantly reduced using the RADIOKEY. Here a defined range is available for the crane or machine operator in which the remote control system can be activated. As a result, unwitting or inadvertent activation of the transmitter is excluded and the receiver is not sent any control information. [More info]

LBT frequency search

LBT frequency search

When switching on or when switching the frequency, a check is carried out to determine whether the used frequency channel is reserved by another transmitter. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without disturbance. LBT is shortcut for Listen before Talk. [More info]

Data feedback

Data reporting

Visual representation of Operating Range, Transmission signal strength, Status of the machine function and Customer-specific information as well as logos supplemented by acoustic feedback (buzzer can be activated). [More info]

Applications

bootslifter

Boat lifter

Brücken und Portalkrane

Bridge & gantry cranes

Containerhubwerk

Container hoists

Hallen und Laufkrane

Overhead cranes

Mischer

Mixer

Regallagersysteme

Storage systems

Winden und Seilzüge

Winches / cables