The Nano-minor is our top seller in the field of joystick transmitters. Despite its compact design, numerous operating elements can be integrated.
- compact, ergonomic design
- can be used in numerous fields of application
- optional: 4.3” LCD display with customised design
- SMJ Technology
|Frequency band (F-Band)||434,050 – 434,750 Mhz|
|Frequency band EU (G-Band)||866 – 870 MHz|
|Frequency band USA||915 MHz|
|HF power||< or = 10 mW|
|Reach||≤ 300 m|
|Typical response time of control commands||15 ms|
|SMJ-Technology||easy joystick change|
|Warning time “battery low”||15 minutes|
|Temperature range||-20 °C to +65 °C|
|Status display||2 x 7-segment functional display (LED)|
|IP degree of protection||IP65|
|NBB battery system|
|Battery quick change system||Ni-MH / 1 500 mAh|
|Operating time||60 hours/battery charge|
|Charging time approx.||1 hour|
|Charging form||external via charger|
|Dimensions||126 x 47 x 18 mm|
|Suitable for||230 V/AC, 110 V/AC, 12/24 V/DC|
|Connector form||optional EU, USA, JP, GB, AU|
|Temperature measurement for optimal recharging|
– Transmitting signal strength
– Status of the machine function
– Customer-specific feedback information and logos on request
Display on monochrome display
Number of pixels: 128 x 64
LBT frequency search
When switching on or switching to another frequency, the system checks whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference. LBT is the abbreviation for ‘Listen before Talk’.
Design as cable desk
For radio-critical work areas, the control unit can be supplied on request, not as a transmitter but as a cable console with the same functional equipment.
2 x AA Mignon
Ni-MH / 1 900 mAH / 1.2 V
Battery: 1.5 V
Operating time: approx. 40 hours
Practical carrying system
Practical carrying system with stomach and neck strap
The Nano-minor is the best-selling model of Nano radio remote controls. It convinces by its compact and robust design as well as its low weight. Despite the compact design, numerous different operating elements can be installed. For example, up to 6 single-axis and 3 two-axis joysticks are possible. However, other operating elements such as toggle switches, rotary switches and buttons can also be integrated without difficulty.
The fact that, despite the small housing, many control elements can still be integrated into the Nano-minor makes it the ideal transmitter for many applications. It is particularly suitable for structural engineering, crane control and the control of industrial plants.
To visualise the feedback of your machine on the transmitter, various possibilities are available. Starting with LED’s over the 7-segment display up to a LCD display everything is possible.
Thanks to the patented SMJ technology, the joysticks of the Nano-minor can easily be replaced by operators themselves during service. Neither staff training nor special tools are required for this! Protective measures against contamination do not have to be taken either, as the housing of the transmitter remains closed throughout when the joystick is replaced. The complete system is thus fully operational again with just a few simple steps and the risk of failure is reduced to a minimum.