Push button transmitter
With the PocketEvo® series NBB has developed a new generation of radio remote control for crane & machine control. The smallest model is distinguished above all by its compact but extremely robust housing.
- modular design
- compact, robust special housing
- 7-segment display for data feedback
- CDC key
- SMP Technology
|Frequency band (F-Band)||433,100 – 434,750 Mhz|
|Frequency band EU (G-Band)||866 – 870 MHz|
|Frequency band USA||915 MHz|
|HF power||< or = 10 mW|
|Reach||≤ 300 m|
|Typical response time of control command||15 ms|
|SMJ-Technology||SMP technology (easy key exchange without opening the housing, no protective measures against contamination necessary)|
|Warning time “battery low”||15 minutes|
|Temperature range||-20 °C to +65 °C||-20 °C to +65 °C|
|Dimensions (L x W x H)||257 x 93 x 60 mm||257 x 93 x 60 mm|
|Weight||600 g||610 g|
|Status display||2 x 7-segment display (LED)||LCD colour display; Number of pixels: 320 x 240|
|IP degree of protection||IP65|
|2 x AA Mignon|
|Rechargeable battery||Ni-MH / 1 900 mAh / 1,2 V|
|Operating time||35 hours|
|Temperature measurement for optimal recharging|
– Transmitting signal strength
– Status of the machine function
– Customer-specific feedback information and logos on request
LBT frequency search
When switching on or switching to another frequency, the system checks whether the frequency channel used is occupied by other transmitters. If this is the case, the next frequency channel is checked until it is ensured that the transmitter can operate without interference. LBT is the abbreviation for ‘Listen before Talk’.
2 x AA Mignon
Ni-MH / 1 900 mAH / 1.2 V
Battery: 1.5 V
Operating time: approx. 40 hours
optionally one-, two- or three-stage
SMP technology: Easy key exchange without opening the housing, no protective measures against contamination necessary.
Max. two rotary switches and / or optionally also potentiometers etc.
left and right one additional button each, for free use
Neck strap for PocketEvo®
Shoulder strap for PocketEvo®
Belly strap for PocketEvo®
Hand strap for PocketEvo®
The smallest model in the new PocketEvo® range has 6 buttons, which can have 1, 2 or 3 levels as well as stepless, depending on customer requirements. In addition, the integration of various additional operating elements such as rotary switches and side buttons is possible without any problems. This makes the PocketEvo® minor suitable for more complex applications in addition to crane control.
Thanks to the patented SMP technology, all installed keys can be easily replaced by operators themselves. Without special tools, each button can be unscrewed individually and a new one inserted. However, the robust special housing remains closed at all times, so that no protective measures against soiling have to be taken. This means that the system is fully operational again in just a few minutes and downtimes are reduced to a minimum!
We have developed our own special housing for optimum protection against dirt and impact. The integrated, all-round protective rubber coating in combination with the glass fibre reinforced plastic core ensures that all electronic components can withstand extreme external mechanical influences. This means that the PocketEvo® can be used in particularly harsh environments without any problems.
Should a transmitter become damaged, you can connect the new device to the receiver and put it into operation in just a few minutes thanks to the integrated CDC key. The key is removed from the device with the help of a screwdriver and inserted into the new one – your system is ready for operation again and expensive downtimes are avoided.
The jury of the Industry Prize was also convinced by the radio remote control, so that they awarded the PocketEvo® the “Industry Prize 2017”. The prize is awarded to particularly progressive industrial products that have a high economic, technological and ecological benefit. The PocketEvo® was awarded the “BEST OF” rating.
Compact, handy and easy to use, the PocketEvo® button transmitter allows you to work in complete safety conditions without reducing the effectiveness of machine operation.