Download area

In this area you will find all documents for download.

FlashPro is used to update the firmware of the transmitter.
The following can be updated: main-controller, sub-controller, rf-controller and joystick-controller.

Works with Flash-Device 2.250.1385

FlashPro-X is used to update the firmware of the transmitter.

The following can be updated: main-controller, sub-controller, rf-controller and joystick-controller.

Works with Flash-Device 2.251.1385

The driver is used for „NBB-USB-Serieal Programming Interface V.1/4“.
x

The STM32Cube Programmer can be used to update the display firmware of the following transmitter: HyPro+, Nano-media and Nano-magna.

QuickConfig can be used to read and write parameters of the transmitter.
In addition, device information can be read.
Works with programming cable 2.250.7502 and 2.251.7502.

Programming cable 2.251.7502 needs minimum Quick Config Version of 3.0.1

RFID-Key Manager can be used to read and write the parameter of NBBs RFID Tag.

Infineon Memtool is used to update the receiver firmware.
x

The Data Transfer Wizard can be used to transfer images and fonts to the display.

MSPFET allows updating the firmware of the receiver Compact-M2 R7/R13.
The main controller and the RF controller can be updated.

QuickParam can be used to read and write parameters of the receiver.
In addition, device information can be read.

You will find the installation file via the red button.
Here are two demo projects for the GSe-Visu.